Mounts on 35 mm DIN Rail, ±0.25% Full Scale Accuracy
DIN Rail Differential Pressure Transmitter are not intended for re-ranging. Designed to mount on a DIN rail. Versatile circuit design enables operation in 2-wire current loops.
Features
-
Simple calibration push-buttons to set zero and span
-
Cost effective and compact device suitable for OEM applications where space, simplicity, and value are key
Product Applications
-
Air handlers
-
Duct pressure
-
Variable air volume
-
Filter monitoring
Specifications
-
Service: Air and non-combustible, compatible gases.
-
Wetted Materials: Consult factory.
-
Accuracy: ±0.25 FS @ 77°F (25°C).
-
Thermal Effect: ±0.02% FS/°F (0.036% FS/°C).
-
Stability: ±1% FS/yr.
-
Temperature Limits: 14 to 185°F (-10 to 85°C).
-
Pressure Limits: See chart on catalog page.
-
Power Requirements: 10 to 35 VDC (2-wire); 17 to 36 VDC, or isolated 21.6 to 33 VAC (3-wire).
-
Output Signal: 4 to 20 mA (2-wire); 0 to 10 VDC (3-wire).
-
Zero and Span Adjustments: Push buttons.
-
Loop Resistance: Current output: 0 to 1250 Ω max; Voltage output: Load resistance 1 kΩ min.
-
Current Consumption: 40 mA max.
-
Electrical Connections: Screw-type terminal block.
-
Process Connections: 1/8" female NPT. Accessories included are 2 barbed fittings for 1/8" (3.12 mm) and 3/16" (4.77 mm) ID rubber or vinyl tubing.
-
Mounting Orientation: Vertical, on a 1.378" (35 mm) DIN rail.
-
Weight: 4.8 oz (136 g).
-
Agency Approvals: CE.
