Series 605 in Flame-Proof Enclosure
ATEX/IECEx Approved 605 Differential Pressure Indicating Transmitter provides visual monitoring and electronic control of very low different pressure in hazardous locations.
Features
-
ATEX housing provides all the capabilities and value of the Magnehelic® 605 in a flame & explosion-proof enclosure
-
Quick response to pressure changes means no delay in assessing critical situations
-
Durable and rugged housing and high-quality components combined provides longservice life and minimized down-time
-
High impact strength and high temperature rated for applications where hazardous environments exist
Product Applications
-
Monitor pressures in ducts, rooms, or total building pressures
-
Filter monitoring
-
Local indication of clean room pressures with process signal sent to control room
-
Hazardous area pressure measurement and transmitter
Specifications
GAGE SPECIFICATIONS
-
Service: Air and non-combustible, compatible gases.
-
Wetted Materials: Consult factory.
-
Accuracy: See 605 ordering page.
-
Pressure Limits: See 605 ordering page.
-
Temperature Limits: 20 to 120°F (-6.67 to 48.9°C); (Note: Product temperature limits differ from case).
-
Size: 4" (101.6 mm) dial face.
TRANSMITTER SPECIFICATIONS
-
Accuracy: See 605 ordering page (includes linearity, hysteresis, repeatability).
-
Compensated Temperature Range: 32 to 120°F (0 to 48.9°C).
-
Thermal Effect: ±0.025% FS/°F (0.045% FS/°C).
-
Stability: ±1% FS/year.
-
Power Requirements: 10 to 35 VDC (2-wire).
-
Output Signal: 4 to 20 mA.
-
Zero and Span Adjustments: Protected potentiometers on 605 face. Can access those by opening case. Allowed only in safe zone.
-
Loop Resistance: DC: 0 to 1250 Ω max.
-
Current Consumption: DC: 38 mA max.
-
Electrical Connections: Screw terminal block.
-
Mounting Orientation: Diaphragm in vertical position.
-
Enclosure Rating: IP66. IP65 with option OPV, overpressure relief valve.
-
Housing Material: Aluminum.
-
Finishing: Texture epoxy coat RAL7038.
-
Pressure Connections: 1/8" NPT female brass (SS optional). In presence of acetylene it is necessary to use SS.
-
Electrical Connections: Two 1/2" FNPT. Cable gland not included.
-
Weight: 12.6 lb (5.7 kg).
-
ATEX Certificate: BVI 14ATEX0072.
-
Agency Approvals: ATEX Compliant CE 1370 Ex II 2G Ex d IIC T6 Gb / II 2D Ex tb IIIC T85°C Db, -60°C=Tamb=+60°C IECEx Compliant: Ex d IIC T6 Gb / Ex tb IIIC T85°C Db
